Titanium / heat-resistant
Technical validation required
Titanium and Heat-Resistant Alloys
This family remains under technical validation. Do not present values as validated for the Qeviora range until internal trials are completed.
- ISO
- S
- Geometry
- D6 | R3 | Z4
- Flutes
- Z4
- Visual finish
- —
Use reliable coolant, short overhang, smooth toolpaths and avoid recutting chips. Displayed example: D6 | R3 | Z4.
Applications for this family
Usage cues. Adapt to grade, machine and toolpath.
- Titanium
- Nickel alloys
- Heat-resistant materials
- Controlled trials only
Indicative starting values — tool D6, R3
Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.
| ISO | Initial vc (m/min) | Initial fz (mm/tooth) | Recommended ae | Recommended ap | Cooling |
|---|---|---|---|---|---|
| S | 35–70 | 0,010–0,025 | 2–6 % D | 0,05–0,20 D | Abundant, reliable coolant |
In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.
Technical validation required: no Qeviora performance claim is made for this family until internal trials are concluded.
Choose a diameter
Select the cutting diameter. The matching shank diameter is applied automatically from the Qeviora standard matrix.
Standard series
Choose a diameter
Select the cutting diameter. The matching shank diameter is applied automatically from the Qeviora standard matrix.
- Cutting diameter
- Ø1 mm
- Shank diameter
- Ø4 mm
- Reference
- QCT-BN-D01-S04
Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.
Contact
Let's discuss your industrial project
Our team is available to understand your challenges and propose support tailored to your performance objectives.
(+212) 06 38 38 11 46
Phone
(+212) 06 38 38 11 46
admin@qeviora.com
Quotations
devis@qeviora.com
Website
www.Qeviora.com
Locations
Qeviora presence
Our strategic presence, built for proximity.
Head Office
Roches-Noires, Casablanca, Morocco
Sales Point & Design Center
Av. Abi Chita El Jamaai, Kénitra, Morocco
Sales Point & Technical Center
Gueznaia, Tanger, Morocco
Sales Point
Beni-Ensar, Nador, Morocco