Key points
- Geometry suitable for general milling applications.
- Available in a focused range of standard diameters.
- Coating selected according to the intended application.
Applications
- Shoulder milling
- Slot milling
- Contouring
- Pocket milling
- Ramping
- Circular interpolation
Geometry intended for stable machining under conditions suited to the material and machine.
Standard diameters
One table per series. Unvalidated lengths and tolerances appear as “To be confirmed”.
| Reference | Engraving code | Dc | Z | Lc | L | Ds | Coating / finish | Technical status | Quote |
|---|---|---|---|---|---|---|---|---|---|
| QCT-EM-D02-Z4-TAN-STD | EM02Z4TAN | 2 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D03-Z4-TAN-STD | EM03Z4TAN | 3 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D04-Z4-TAN-STD | EM04Z4TAN | 4 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D05-Z4-TAN-STD | EM05Z4TAN | 5 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D06-Z4-TAN-STD | EM06Z4TAN | 6 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D08-Z4-TAN-STD | EM08Z4TAN | 8 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D10-Z4-TAN-STD | EM10Z4TAN | 10 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D12-Z4-TAN-STD | EM12Z4TAN | 12 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed | |
| QCT-EM-D16-Z4-TAN-STD | EM16Z4TAN | 16 | 4 | To be confirmed | To be confirmed | To be confirmed | TAN coating | To be confirmed |
Cutting data
Displayed parameters are indicative or pending validation according to their status. They must be adapted to the machine, workpiece material, tool holder, clamping, coolant, system rigidity and actual machining conditions.
| Vc (m/min) | fz (mm/tooth) | ap max | ae max | Status |
|---|---|---|---|---|
| To be confirmed | To be confirmed | To be confirmed | To be confirmed | To be confirmed |
Contact
Let's discuss your industrial project
Our team is available to understand your challenges and propose support tailored to your performance objectives.
(+212) 06 38 38 11 46
Phone
(+212) 06 38 38 11 46
admin@qeviora.com
Quotations
devis@qeviora.com
Website
www.Qeviora.com
Locations
Qeviora presence
Our strategic presence, built for proximity.
Head Office
Roches-Noires, Casablanca, Morocco
Sales Point & Design Center
Av. Abi Chita El Jamaai, Kénitra, Morocco
Sales Point & Technical Center
Gueznaia, Tanger, Morocco
Sales Point
Beni-Ensar, Nador, Morocco