Stainless Steel

Focus on heat control, stable engagement and chip evacuation. Avoid rubbing and excessively low feeds.

ISO: M
Geometry: D6 | R3 | Z4
Flutes: Z4
Visual finish: TiAlN

Z4 geometry, TiAlN visual finish. Displayed example: D6 | R3 | Z4.

Applications for this family

Usage cues. Adapt to grade, machine and toolpath.

Austenitic stainless
Ferritic / martensitic stainless
Duplex with adaptation
Finishing with controlled evacuation

Indicative starting values — tool D6, R3

Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.

Confirm by trialIndicative values

ISO	Initial vc (m/min)	Initial fz (mm/tooth)	Recommended ae	Recommended ap	Cooling
M	45–90	0,012–0,030	3–8 % D	0,05–0,25 D	Emulsion recommended

In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.

Elegir un diámetro

Seleccione el diámetro de corte. El diámetro de mango correspondiente se aplica automáticamente según la matriz estándar Qeviora.

Serie estándar

Elegir un diámetro

Seleccione el diámetro de corte. El diámetro de mango correspondiente se aplica automáticamente según la matriz estándar Qeviora.

Diámetro de corte

Diámetro de corte: Ø1 mm
Diámetro de mango: Ø4 mm
Referencia: QCT-BN-D01-S04

Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.