Titanium and Heat-Resistant Alloys

This family remains under technical validation. Do not present values as validated for the Qeviora range until internal trials are completed.

ISO: S
Geometry: D6 | R3 | Z4
Flutes: Z4
Visual finish: —

Use reliable coolant, short overhang, smooth toolpaths and avoid recutting chips. Displayed example: D6 | R3 | Z4.

Applications for this family

Usage cues. Adapt to grade, machine and toolpath.

Titanium
Nickel alloys
Heat-resistant materials
Controlled trials only

Indicative starting values — tool D6, R3

Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.

Confirm by trialIndicative values

ISO	Initial vc (m/min)	Initial fz (mm/tooth)	Recommended ae	Recommended ap	Cooling
S	35–70	0,010–0,025	2–6 % D	0,05–0,20 D	Abundant, reliable coolant

In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.

Technical validation required: no Qeviora performance claim is made for this family until internal trials are concluded.

Elegir un diámetro

Seleccione el diámetro de corte. El diámetro de mango correspondiente se aplica automáticamente según la matriz estándar Qeviora.

Serie estándar

Elegir un diámetro

Seleccione el diámetro de corte. El diámetro de mango correspondiente se aplica automáticamente según la matriz estándar Qeviora.

Diámetro de corte

Diámetro de corte: Ø1 mm
Diámetro de mango: Ø4 mm
Referencia: QCT-BN-D01-S04

Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.