Titanium / heat-resistant
Technical validation required
Titanium and Heat-Resistant Alloys
This family remains under technical validation. Do not present values as validated for the Qeviora range until internal trials are completed.
- ISO
- S
- Geometry
- D6 | R3 | Z4
- Flutes
- Z4
- Visual finish
- —
Use reliable coolant, short overhang, smooth toolpaths and avoid recutting chips. Displayed example: D6 | R3 | Z4.
Applications for this family
Usage cues. Adapt to grade, machine and toolpath.
- Titanium
- Nickel alloys
- Heat-resistant materials
- Controlled trials only
Indicative starting values — tool D6, R3
Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.
| ISO | Initial vc (m/min) | Initial fz (mm/tooth) | Recommended ae | Recommended ap | Cooling |
|---|---|---|---|---|---|
| S | 35–70 | 0,010–0,025 | 2–6 % D | 0,05–0,20 D | Abundant, reliable coolant |
In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.
Technical validation required: no Qeviora performance claim is made for this family until internal trials are concluded.
Scegliere un diametro
Selezionare il diametro di taglio. Il diametro del gambo corrispondente viene applicato automaticamente secondo la matrice standard Qeviora.
Serie standard
Scegliere un diametro
Selezionare il diametro di taglio. Il diametro del gambo corrispondente viene applicato automaticamente secondo la matrice standard Qeviora.
- Diametro di taglio
- Ø1 mm
- Diametro del gambo
- Ø4 mm
- Riferimento
- QCT-BN-D01-S04
Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.
Contatto
Parliamo del vostro progetto industriale
Il nostro team è disponibile per comprendere le vostre sfide e proporre un accompagnamento adatto ai vostri obiettivi di performance.
(+212) 06 38 38 11 46
Telefono
(+212) 06 38 38 11 46
admin@qeviora.com
Preventivo
devis@qeviora.com
Sito web
www.Qeviora.com
Localizzazione
Presenza Qeviora
La nostra presenza strategica al servizio della vostra prossimità.
Sede legale
Roches-Noires, Casablanca, Morocco
Punto vendita e centro di progettazione
Av. Abi Chita El Jamaai, Kénitra, Morocco
Punto vendita e centro tecnico
Gueznaia, Tanger, Morocco
Punto vendita
Beni-Ensar, Nador, Morocco