Steel | Qeviora

HomeProductsCutting toolsSolid Carbide Ball Nose End MillsSteel

Steel

Family for contour semi-finishing and finishing on steels, adapted to grade and stability.

ISO: P
Geometry: D6 | R3 | Z4
Flutes: Z4
Visual finish: AlTiN

Air or emulsion cooling depending on strategy, stability and grade. Displayed example: D6 | R3 | Z4.

Applications for this family

Usage cues. Adapt to grade, machine and toolpath.

Unalloyed steels
Alloy steels
Contours and semi-finishing
3D finishing under stable conditions

Indicative starting values — tool D6, R3

Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.

Confirm by trialIndicative values

ISO	Initial vc (m/min)	Initial fz (mm/tooth)	Recommended ae	Recommended ap	Cooling
P	80–150	0,015–0,035	3–10 % D	0,05–0,30 D	Air or emulsion

In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.

选择直径

选择切削直径。对应柄径将根据 Qeviora 标准矩阵自动应用。

标准系列

选择直径

选择切削直径。对应柄径将根据 Qeviora 标准矩阵自动应用。

切削直径

切削直径: Ø1 mm
柄径: Ø4 mm
参考号: QCT-BN-D01-S04

Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.