Titanium and Heat-Resistant Alloys

This family remains under technical validation. Do not present values as validated for the Qeviora range until internal trials are completed.

ISO: S
Geometry: D6 | R3 | Z4
Flutes: Z4
Visual finish: —

Use reliable coolant, short overhang, smooth toolpaths and avoid recutting chips. Displayed example: D6 | R3 | Z4.

Applications for this family

Usage cues. Adapt to grade, machine and toolpath.

Titanium
Nickel alloys
Heat-resistant materials
Controlled trials only

Indicative starting values — tool D6, R3

Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.

Confirm by trialIndicative values

ISO	Initial vc (m/min)	Initial fz (mm/tooth)	Recommended ae	Recommended ap	Cooling
S	35–70	0,010–0,025	2–6 % D	0,05–0,20 D	Abundant, reliable coolant

In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.

Technical validation required: no Qeviora performance claim is made for this family until internal trials are concluded.

选择直径

选择切削直径。对应柄径将根据 Qeviora 标准矩阵自动应用。

标准系列

选择直径

选择切削直径。对应柄径将根据 Qeviora 标准矩阵自动应用。

切削直径

切削直径: Ø1 mm
柄径: Ø4 mm
参考号: QCT-BN-D01-S04

Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.