Stainless Steel

Focus on heat control, stable engagement and chip evacuation. Avoid rubbing and excessively low feeds.

ISO: M
Geometry: D6 | R3 | Z4
Flutes: Z4
Visual finish: TiAlN

Z4 geometry, TiAlN visual finish. Displayed example: D6 | R3 | Z4.

Applications for this family

Usage cues. Adapt to grade, machine and toolpath.

Austenitic stainless
Ferritic / martensitic stainless
Duplex with adaptation
Finishing with controlled evacuation

Indicative starting values — tool D6, R3

Conservative starting ranges for a D6 ball nose with low to moderate radial engagement. Confirm by trial.

Confirm by trialIndicative values

ISO	Initial vc (m/min)	Initial fz (mm/tooth)	Recommended ae	Recommended ap	Cooling
M	45–90	0,012–0,030	3–8 % D	0,05–0,25 D	Emulsion recommended

In ball-nose milling, effective cutting speed decreases toward the tool centre. For 3D finishing, prefer tool tilt or a toolpath that avoids continuous centre cutting.

Durchmesser wählen

Wählen Sie den Schneiddurchmesser. Der passende Schaftdurchmesser wird automatisch gemäß der Qeviora-Standardmatrix gesetzt.

Standardreihe

Durchmesser wählen

Wählen Sie den Schneiddurchmesser. Der passende Schaftdurchmesser wird automatisch gemäß der Qeviora-Standardmatrix gesetzt.

Schneiddurchmesser

Schneiddurchmesser: Ø1 mm
Schaftdurchmesser: Ø4 mm
Referenz: QCT-BN-D01-S04

Technical warning: illustrated visuals, coatings and cutting parameters are indicative only. They are not a performance guarantee, a commercial equivalence with another manufacturer, or final validation without machine trials.